Ghost Image Remover

Apply tocleaning the ghost image when reclaim the stencil

Download Materials

Ghost Image Remover is Grey water base abrasives mix with surfactant. it is used for cleaning the ghost image when reclaim the stencil, It is also can by used for degreasing the screen

Usage 

Step 1. Stir the ghost image remover with a stick to make it uniform. 

Step 2. Brush a little ghost image remover on the both side of mesh，Uniformly cover ghost image area. 

Step 3. Wait for only 5~10 minutes，please don’t leave the remover on the mesh too long time, otherwise it will broken mesh’s fibrous tissue 

Step 4. Wet the remover on the screen with a gentle spray of water. 

Step 5. Then spray forcefully the ghost area until the screen clear.

Notice:

1. Close the bottle tightly to prevent volatilization, store in the cold, dark and ventilated place. 

2. This product contain volatile solvent, please put on protective gloves and masks and process in ventilated place. 

3. Keep away from fire

Storage: 

Storage in a dry, ventilated place in 20℃~25℃ 

Packing: 

1KG