— Screen amplification detection system CDL-430P
— Mechanical Tensioner FS-310II
— Precision screen printing machine 4860A&AF
— Screen Exposure Machine FS-LW-1215
— Stainless steel plate processing station FS-1012WM
— Vertical Screen Oven FS-1012DFV
— Horizontal Screen Oven FS-1012DFL
— Digital Thickness Measuring Machine MG-500
— Portable film thickness meter DCF-900
— CCD magnifying glass CDL-430P
1. Characteristics
1.1 Adopt high-performance image processing device and high-precision position integration system to realize high-precision positioning;
1.2 Using a unique off-grid system, the amount of off-grid can be adjusted arbitrarily for the movement of the scraper, realizing high-precision printing (special function);
1.3 Through the menu function, quickly•accurately reproduce the printing conditions of different substrates, and shorten the operation preparation time (standard specification);
1.4 The mechanical operation and image processing are digitally controlled by touch screen and servo motor, which realizes the correct printing action;
1.5 The cause of failure and corresponding measures are displayed on the touch screen, which is easy to operate.
2. Basic specifications
| Parameter | |
| Size | 200(X)×50(Y)―610(X)×610(Y)mm |
| Speed | About 7 seconds/piece (except the time for loading and unloading the printing plate; when the camera figure recognition and positioning, printing and ink return are calculated as 1 second each) |
| Frame | Applicable screen frame: 950×950mm, 1000×1000mm, thickness 30-40mm Drive method: AC servo motor & precision screw (1 axis each at the front and rear) Screen height: 0-20 mm (0 means the screen surface and the printing table are on the same level) Distance from the screen: 0-20 mm (0 refers to the height of the screen surface during printing to maintain the set screen height) Fine adjustment amount: ±5mm (fine adjustment amount in X, Y1, Y2 directions) Screen frame lifting method: the front end of the screen frame rises (about 22°) |
| Squeegee | Drive mode: AC servo motor & belt drive Printing stroke: 0-760mm Printing speed: 2.1-39.6m/min(35-660mm/sec) Scraper angle adjustment: 60°-80° Size: 350-700(L)×45-50(W)×9(T)mm |
| Plate | Size: 750(W)×750(D)×32(T)mm Material: surface stainless steel, main structure aluminum Printed plate fixing method: Vacuum suction (structure to increase the amount of suction) Vacuum suction hole: suction hole diameter ø1.0mm, hole distance 15mm, vacuum range 600×600mm Printing table driving method: AC servo motor & precision screw, move left and right Repeat positioning accuracy of printing table: ±0.01mm Position integrated drive: stepper motor & precision screw & times; 3 axes Integration accuracy: ±0.015mm |
| Image | CCD quantity: 2 CCD cameras CCD field of view: 8(H)mm×6(V)mm Lighting (light source): diode light ring |
| Safe | In front of the printing press, there is a safety detector. If danger is detected when the plate frame is falling, the plate frame will stop falling immediately |
| Machine | Size: 2500(W)×1500(D)×1210(H)mm Weight: about 1600kg Printing table height: 900±10mm |
| Install | Power supply: 3-phase, AC200V±10%, 50/60Hz Power consumption: 5.2kVA (air switch, leakage detection: 30mA) Working air pressure: 0.4-0.5MPa Gas volume used: 6L/min |
| Function | Ink return shovel Inclined printing ±5 degrees Scraper down position adjustment mechanism Curved off-grid mode Automatic pressure setting Number of menu entries: 100, 200, 400 |
Textile and Garment Printing Industry
High Temperature Ceramic/Glass Water Transfer Industry
Bicycle labeling/plastics/spraying bottle water transfer Industry
service@denbishi.com
http://www.denbishi.com/
0512-57469669
0512-57469569
269 Shaoqing East Road, Qiandeng Town, Kunshan City, Jiangsu Province
Copyright DENBISHI Intelligent Technology (Kunshan) Co., Ltd.
