PET-C series membrane switch screen printing ink

Apply toSurface printing of treated PET, PC, PMMA, PVC substrates, as well as various physical plating materials and Hard-Coating materials, used in electronic membrane switches, marking sheets, PET labels and signs, metal nameplates, etc.

Download Materials

1. Scope of application

It is suitable for surface printing of treated PET, PC, PMMA, PVC substrates, as well as various physical plating materials and Hard-Coating materials, used in electronic membrane switches,

Labels, PET labels and signs, metal nameplates, etc.

2. Product Features

2.1 Volatile and dry single liquid type, semi-gloss satin effect.

2.2 Strong adhesion, wide applicability.

2.3 Environmental protection, in line with EU RoHS directive.

3. Product properties (surface of PET material)

3.1 Test conditions: This test is carried out on 16μm treated PET material with black ink;

Screen: 250-mesh screen, film thickness 8μm; single-pole printing; forced drying at 70℃×30 minutes.

3.2 Test method: test after printing and drying the sample for 24 hours.

3.3 Special matters:

3.3.1 Weather resistance *The white ink is used for testing;

3.3.2 The above test results are based on our company's environment, not guaranteed values, and are for reference only.

4. Printing process

4.1 Screen mesh: 200-300 mesh;

4.2 Please use TC series special diluent, the addition ratio is 1~10%;

4.3 It is recommended to use TS-300 special cleaning agent for screen cleaning;

4.4 Conventional drying methods are: self-drying, hot air blowing, and low-temperature drying.

5. Matters needing attention

5.1 Before printing, please ensure that the surface of the base material is clean and free of oil, and it is best to perform static electricity removal treatment, otherwise it is prone to burrs, wire drawing and other adverse conditions;

5.2 When diluting, please use TC series special thinner, and do not mix it with other inks or solvents;

5.3 Due to the differences in printing methods and drying conditions caused by different substrates, there are likely to be differences in adhesion, color registering effect and thickness of the final film layer. Please be sure to

Relevant tests must be done before batch use and confirmed before use;

5.4 When using this product, please be sure to obtain the specified MSDS, read it carefully and understand the user's responsibilities before using it.

6. Save

Please keep away from fire sources, and store sealed in a dark, cool and ventilated place.

7. Shelf life

Two years from the date of manufacture. After opening, it is recommended to use as soon as possible.